Home > Services > Brands > Spikes Tactical
Sort By:
Page of 1
Spikes Tactical Snowflake Lower Receiver - Non Filled - STLS030 Spikes Tactical Snowflake Lower Receiver - Non Filled - STLS030

Spikes Tactical Snowflake Lower Receiver - Non Filled - STLS030

Unicorn Logo

  • Safe Space, Triggered, and Full Libturd Selector Markings
  • 7075 T6 Forged Receiver
  • Multi Caliber
  • MIL-A-8625F Type III Class 2 Hard Coat Anodized Finish
  • Low Shelf, RDIAS Compatible

  • Weight: 8.6oz

    Our Price: $115.00
    Spikes Tactical ST- 16" M4 LE- 5.56 Barrel - SB516005-M4 Spikes Tactical ST- 16" M4 LE- 5.56 Barrel - SB516005-M4

    Spikes Tactical ST- 16" M4 LE- 5.56 Barrel - SB516005-M4

    Barrel Steel is Certified MIL-B-11595E Chromoly Vanadium Alloy and Magnetic Particle Inspected they are also stress relieved.

    Features:

    Mil-Spec M4 Barrel Extension with 5.3.1.2 MIL-STD-171 Phosphate Finish

    1.2.2.2 MIL-STD-171 Hard Chrome Chamber

    1/7 Twist Rate

    1.2.2.2 MIL-STD-171 Hard Chrome Bore

    5.56mm Nato chamber

    All Chambers are Individually Checked for Head Spacing Before and After Plating

    All Barrels are Individually High Pressure Tested (HPT) and then Individually Magnetic Particle Inspected (MPI)

    5.3.1.2 MIL-STD-171 Phosphate Finish on the Barrel Exterior

    1/2x28 Thread Pitch

    Threads are Cut Concentric to the Bore

    Uses 0.750" Gas Block

    Weight is 28.0oz

    Spike's Lifetime Warranty

    List Price: $289.00
    Our Price: $224.99
    Savings: $64.01
    SPIKES TACTICAL BILLET GEN 2 UPPER - SFT50B2 SPIKES TACTICAL BILLET GEN 2 UPPER - SFT50B2

    SPIKES TACTICAL BILLET GEN 2 UPPER - SFT50B2

    The Spike’s Tactical billet upper-Gen II receiver is not just another different cosmetic alternative to forged upper receivers but it’s actually designed with functional upgrades that aren’t available on other billet upper receivers!


    We machine this bad boy out of 7075 billet Aluminum and finish it in a durable Type III Hardcoat Anodized finish. Of course, we cut the M4 feed ramps before the Anodizing process to avoid reliability issues down the road. We also flared the side walls of the receiver to eliminate accidental bolt release problems and we also machined the upper receiver in a way that lets you use the popular Magpul BAD lever or other aftermarket bolt catch levers which most other billet upper receivers don’t let you do. Because of our beefier design, it allows for less flex than forged upper receivers.


    We also play nice here at Spike’s Tactical and because of that, we machined our billet upper receiver to accept most aftermarket rail systems as well as pre-install the forward assist and the ejection port door. Just like how our billet lower receiver utilizes set screws to retain everything in place, the forward assist is held in place with a set screw for easy disassembly if you ever need to in the life of this upper receiver.


    Our billet upper receiver matches our billet lower perfectly, but it also works great with standard forged lowers so it’s fully up to you on which receiver you want to use.


    Get one today and make your next build the envy of everyone at the range!


    Features:

    Machined from billet 7075 Aluminum with a Type III Hardcoat Anodized finish

    M4 feed ramps machined before the Anodizing process

    Flared side walls to eliminate accidental bolt release

    Pre-installed forward assist and ejection port door

    Works with the Magpul BAD lever and other aftermarket bolt release levers

    Spikes Tactical engraving

    Works with most other aftermarket rail systems


    Included:

    Spike’s Tactical billet upper Gen II receiver (stripped)

    Forward assist and ejection port door cover come pre-installed

    Spike's Tactical Lifetime Warranty

    Model: SFT50B2

    Shipping Weight: 0.65lbs

    SPIKES TACTICAL BILLET GEN 2 AMBI LOWER - STLB200 SPIKES TACTICAL BILLET GEN 2 AMBI LOWER - STLB200

    SPIKES TACTICAL BILLET GEN 2 AMBI LOWER - STLB200

    Introducing the new Spike's Tactical Gen II billet lower receiver!

    Features:

    Just when you thought it couldn't be any better we bring you this new cutting edge design. The new Gen II billet lower receiver is based off of our original Biohazard billet lower receiver but with many added features, reduced weight, and enhanced styling. If you want the absolute best AR15 lower receiver on the market then this is for you!

    - Gen II billet lower receiver specifications and features:

    - All edges and surfaces have been 3D chamfered to reduce snagging while still maintaining the blocky billet look

    - Type III hardcoat anodized finish

    - Integrated winter style trigger guard

    - Integrated ambi bolt release paddle. The paddle is machined from 4140 Chromoly bar stock and features a durable black Nitride finish

    - Integrated ambi magazine release paddle. The paddle is machined from 4140 Chromoly bar stock and features a durable black Nitride finish

    - Oversized enhanced bolt catch. The bolt catch is machined from 4140 Chromoly bar stock and features a durable black Nitride finish

    - Enhanced 6061-T6 billet magazine catch button which features a hard anodized finish

    - All paddles are ergonomically positioned and optimized for both left hand and right hand shooters. The paddle surfaces and mag catch button also feature an aggressive textured finish for positive engagement

    - Enhanced pivot and take down pins which were designed around the lower receiver for a unique integrated look The pivot and take down pins are machined from 6AL4V Titanium and feature a grey hard anodized finish infused with Teflon for ultra-smooth function

    - The pivot and take down pins have slightly larger heads and dimples in the end which allow you to break the rifle down much quicker and easier

    - Lower receiver design integrates KNS Gen 2 Mod ST anti-rotation pins. Very low profile and very clean appearance

    - Large flared magwell

    - Magwell is compatible with all AR15/M16 magazines including the M3 Pmag, Beta C mag, and Surefire high capacity magazines

    - Magwell will drop free of ALL in-spec magazines

    - The front of the magwell is textured for an aggressive appearance

    - Low shelf for RDIAS use

    - Set screw for adjustable trigger reset

    - Set screw for upper to lower tension

    - Bolt catch and bolt release paddle are retained with a threaded stainless steel pin rather than a roll pin

    - Lower receiver can be assembled without a hammer and punch

    - 3D machined Spider logo

    - 3D machined bullet pictogram safety selector markings on both sides of the receiver

    - Clean milled engraving for all text and information

    - Caliber is marked Multi for use with any cartridge that will fit in an AR15 magwell

    - Compatible with 45* BAD ASS, 57* V7, 60* Noveske, and all 90* safety selectors

    - Pockets machined in many areas to reduce weight. The lower receiver design was engineered to put the weight and strength exactly where we wanted it. The end result is a cutting edge billet lower receiver that weighs only 248.9 grams stripped! Now you can have a billet lower receiver with full ambi controls at the weight of a standard forged receiver without sacrificing any strength.

    - 100% Made in the USA and backed by our Lifetime Warranty!


    Technical specifications:

    - The Gen II billet lower receiver comes with the following components already installed to make your life easier:

    - Titanium pivot pin, detent, and spring

    - Titanium take down pin, detent, spring, and 4-40 set screw

    - KNS Gen 2 Mod ST anti-rotation trigger and hammer pins

    - Spike's Tactical 90* ambi safety selector

    - Enhanced bolt catch

    - Ambi bolt release paddle

    - Bolt catch spring

    - Bolt catch plunger

    - Ambi bolt release cross pin

    - Threaded stainless steel pin for bolt catch

    - Threaded stainless steel pin for ambi bolt release paddle

    - Ambi magazine release paddle

    - Magazine catch

    - Magazine catch spring

    - Billet magazine catch button

    - Set screw for adjustable trigger reset

    - Nylon tip set screw for upper to lower tension

    - 2 short set screws to lock adjustable trigger reset set screw and upper to lower tension set screw in place


    These are the parts required to complete the Gen II billet lower receiver. However these parts are NOT included:

    Pistol grip of choice

    Ejector Spring

    Grip screw

    Grip screw washer

    Receiver extension or buffer tube

    Latch plate

    Castle nut

    Stock body of choice

    Buffer

    Buffer spring

    Hammer, trigger, and disconnect or aftermarket trigger group of choice

    While our billet upper receiver and billet lower receiver are a perfect match with each other, they will also work with forged upper receivers and forged lower receivers.

    The billet upper and lower receivers also maintain compatibility with most Mil-Spec components. So in the event you break or loose a component in the field you don't have to worry about finding any proprietary parts to get it back up and running again. Yes we did think of everything.